Linksys wireless with Ubuntu server
Linux
Been trying to get a linksys wireless card working on my server with Ubuntu 8.04. Its not the easiest thing.
My output of lspci shows:
Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
And my lshw -C network:
*-network<br />
description: Network controller<br />
product: BCM4306 802.11b/g Wireless LAN Controller<br />
vendor: Broadcom Corporation<br />
physical id: 9<br />
bus info: pci@0000:01:09.0<br />
version: 03<br />
width: 32 bits<br />
clock: 33MHz<br />
capabilities: bus_master<br />
configuration: driver=b43-pci-bridge latency=32 module=ssb<br />
*-network<br />
description: Wireless interface<br />
physical id: 1<br />
logical name: wlan0<br />
serial: 00:0f:66:f3:0e:78<br />
capabilities: ethernet physical wireless<br />
configuration: broadcast=yes multicast=yes wireless=IEEE 802.11g<br />
And my output of iwconfig:
lo no wireless extensions.</p>
<p>eth0 no wireless extensions.</p>
<p>wmaster0 no wireless extensions.</p>
<p>wlan0 IEEE 802.11g ESSID:“My_SSID”<br />
Mode:Managed Frequency:2.412 GHz Access Point: 00:1D:68:F6:5D:95<br />
Tx-Power=27 dBm<br />
Retry min limit:7 RTS thr:off Fragment thr=2346 B<br />
Encryption key:9A25-A0A5-90<br />
Link Quality:0 Signal level:0 Noise level:0<br />
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0<br />
Tx excessive retries:0 Invalid misc:0 Missed beacon:0<br />
So the hardware apparently is a little tricky but I have downloaded the firmware and drivers that should support it with the correct wrapper.
Except its really not working yet.
comments powered by Disqus